Designed for the transportation of liquid goods in RID classes 3, 6 and 9.
Products can be heated to as much as +190°C to ensure there is no residue from discharging.
Can be filled via the bottom discharge. Top discharge can be fitted as an option.
The addition of a riser can convert it to a chemical tank wagon, e.g. to carry phenol, benzene and vinyl acetate monomer.
Uncomplicated and inexpensive tank cleaning thanks to externally mounted heating system.
|Tare weight||Approx. 26.0 t|
|Axle load||22.5 t|
|Clearance: outer wheelsets||13,000 mm|
|Min. curve radius||35 m|
|Brake block category||Gray cast iron|
|Tank material||Carbon steel (S355J2+N)|
|Nominal volume||Approx. 80 m³|
|Forced ventilation||Mechanical, self-operating (linked to a bottom valve)|
|Bottom valve||DN 100, heatable|
|T-piece||DN 100, insulated, can be heated separately|
|Vapour return||Operated from bottom level on both sides,|
with pressure tight cap
|Design temperature||-20 / + 190°C|
|Heating|| 6-pipe externally mounted, 8.0 m² |
Test/operating excess pressure of 18.0/12.0 bar
|Insulation|| Mineral wool felt, 100 mm |
Insulation cover made of stainless steel
|Residue emptying||1.5° slope angle and tank sump|