The Smmnps wagon is an optimal solution on the market for the transport of hot steel slabs. The wagon is very light with a tare weight of only 20,8 t. In addition it is equipped with bogies designed for axle-loadings of 25 t at a loaded speed of 100 km/h and can thus carry a load of up to 79,2 t. The wagon is equipped with 4 load securing bolster beams.
The wagon can be loaded with slabs of different lenghts and widths. The slabs will be loaded onto the wagon by a crane with grabs or magnets. Special load securing bolster beams on the wagons secure the load against sliding in lateral and longitudinal direction. The slabs can be loaded in hot or cold condition.
|Tare weight||Approx. 21 t|
|Axle load||25 t|
|Clearance: Outer wheelsets||10,400 mm|
|Min. curve radius||75 m|
|Brake||KE-P, 2x Bgu 16“|
|Brake block category||Gray cast iron|
|Drawgear & static tractive force||Split, reinforced, 1350 kN|
|Loading length||Approx. 12,052 mm|
|Loading width|| Innerhalb der seitl. Anschläge A-A, 2.975/2.601 mm |
Innerhalb der seitl. Anschläge B-B, 3.091/2.717 mm
|Floor type||Steel floor|
|Loading height above top of rail, unloaded|| 1.620 mm (Anschläge B-B) |
1.700 mm (Anschläge A-A)
|Stanchions||Optional 4 Rungepaare|